SDSS Plates

The SDSS has used thousands of plug plates in its fourteen year history. These are large aluminium plates into which tiny holes are drilled. Each hole has an optical fibre plugged into it (by hand by our plate pluggers). Each hole corresponds to the sky location where there is an object (a star or a galaxy) which SDSS wants to measure a spectrum for.

During SDSS spectroscopic observations, between six and nine of these are used every night. Each plate is custom drilled for a special part of the sky (about the size of your palm stretched out at arms length), and once all the data is collected for the astronomical objects in that plate, it becomes surplus to requirements.

All SDSS Collaboration members can request that used plates be sent to them (contact your Collaboration Council Representative for assistance with this). This has resulted in some interesting uses for the leftover plates across our diverse collaboration.

You might like to mount your plates on the wall for display.

A wall mounted plate at the Institute of Cosmology and Gravitation, Portsmouth, UK.

A wall mounted plate at the Institute of Cosmology and Gravitation, Portsmouth, UK. Image credit: Karen Masters

SDSS plates on display at CCAPP (Center for Cosmology and Astrophysics), Ohio State University. Image credit: Qingqing Mao.

SDSS plates on display at CCAPP (Center for Cosmology and Astrophysics), Ohio State University. Image credit: Qingqing Mao.

If doing this, it is helpful to have a good description as a guide. This is especially helpful if you are donating a plate to a local science museum or other location away from SDSS collaboration members who know what it is. The example below was made for a display of plate 825 by Jordan Raddick from Johns Hopkins University in Baltimore.

plate825_small

To make a version of Jordan’s information sheet tailored for your own plate you can find the sky co-ordinates of your plate in this List of plate observation dates and centres. Then visit the Skyserver Navigate Tool to find an image at this location. You will likely want to invert the images, zoom out to the second largest scale, and overlay the plate location (all under “Drawing Options” to the right of the screen). You can then use Google sky to work out roughly which constellation this plate is in (unless you happen to know!), and the constellation maps are available from the IAU. To convert the MJD of observation to something understandable you might like this MJD converter.

We have a second example of plate display information from David Kirkby at UC Irvine. Here David has made an overlay of the SDSS imaging and coloured marks corresponding to the holes in BOSS plate 6640 (green for galaxies and purple for quasars), as well as an 3D representation of the distances to these objects (based on their SDSS measured redshifts).

An overlay for Plate 6640 showing both SDSS imaging and the location of drilled holes (green = galaxies; purple = quasars). Image credit: David Kirkby.

An overlay for Plate 6640 showing both SDSS imaging and the location of drilled holes (green = galaxies; purple = quasars). Image credit: David Kirkby.

A visualisation of the 3D structure behind BOSS plate 6640 based on redshifts measured by SDSS. Image credit: David Kirkby.

A visualisation of the 3D structure behind BOSS plate 6640 based on redshifts measured by SDSS. Image credit: David Kirkby.

It’s possible to back light wall mounted plates in some circumstances, to really nice effect. The below example was made by Mark Klaene at Apache Point Observatory.

KlaeneMount

Mounted in the corner of Mark Klaene’s office at APO. It is spray painted black with a fluorescent desk lamp back light.

If you’re lucky you might find a natural source of light for this effect, as in this example where Stephen Bailey from LBL has mounted a plate in the window in his office door.

OfficeDoor

SDSS Plate in an Office Door (the hole was there already).

Several collaboration members have used plates to make special coffee tables, or coffee table covers.

The most basic version of this is just placing a plate on top of a round coffee table of similar diameter.

ICG_coffeetable

Coffee table topper by Bob Nichol, ICG Portsmouth.

This second one uses a 36″ round glass top table topped with a plate. Bumpers have been added to the plate and the normal glass top placed on top of it. The lighting shown below is from a single puck from a modular LED lighting system.

PlateTableBCLee.png

Coffee table with under lighting by Brian Lee from SDSS-II.

At JHU they have made two coffee tables with the SDSS plates. The base is a hollow box made from scratch of four wood pieces and there is a lamp inside so at night you can see the light shining through the slits.

SDSSPlate_CoffeeTable1_small

Custom coffee table at JHU. Credit: Ting-Wen Lan, Murdock Hart, Guangtun Zhu and Brice Ménard. Photo courtesy of Zheng (Jared) Zheng.

SDSS Plug Plate Coffee Tables in use at JHU. Image credit: Gail Zasowski

SDSS Plug Plate Coffee Tables in use at JHU. Image credit: Gail Zasowski

Plates have also been used to make lab demos. The below is an example set up which LBL has to give quick demos.

LBLDemoPlate1

SDSS Plate Demo at LBL.

SDSS plates have also been used to make works of art. The most well know is work by Josiah McElheny in collaboration with David Weinberg (also described here and in this NYTimes Article).

Sculpture by Josiah McElheny using SDSS plug plate. Image provided by David Weinberg.

Sculpture by Josiah McElheny using SDSS plug plate. Image provided by David Weinberg.sdss

 

Sarah Ruether, an artist from Seattle and London based artist Xavier Poultney have also made artwork using plates.

Public art by Sarah Ruether made from SDSS-II plug plates

Public art by Sarah Ruether made from SDSS-II plug plates

Plate Artwork by Xavier Poultney as part of his Transient Objects exhibit.

Plate Artwork by Xavier Poultney as part of his Transient Objects exhibit.

If you have other examples of interesting uses of SDSS plates please let us know about them by commenting below, or emailing outreach@sdss.org.

See how the plates are drilled at the SDSS Plate Drilling Labs at the University of Washington in Seattle:
[youtube https://www.youtube.com/watch?v=iYyO7pGaJNw]

See how the optical fibres are plugged into a BOSS plate by our awesome SDSS plate pluggers (at Apache Point Observatory): [youtube https://www.youtube.com/watch?v=i6ZOUDWRwtg]

12 thoughts on “SDSS Plates

  1. Pingback: SDSS Plates for Education | Science Blog from the SDSS

  2. Pingback: SDSS at the New York Hall of Science | Science Blog from the SDSS

  3. Pingback: SDSS Plates as Art in Nashville, Tennessee | Science Blog from the SDSS

  4. Pingback: MaNGA plate at Fife Doors Open | Shine

  5. Pingback: IYL2015 Post: SDSS Plates (in Retirement!) | Science Blog from the SDSS

  6. Pingback: El cofre del tesoro: APOGEE | Astrobites en español

  7. Pingback: The APOGEE Treasure Trove | astrobites

  8. Pingback: SDSS-V Is Underway! | Science Blog from the SDSS

  9. Is there any way that a mere mortal might be able to get his hands on one of these. I have a person that this would make the ultimate gift for.

  10. I really want to buy some of the plates for an art project im working on. I just became aware of them. Please let me know what purchasing would entail thank you for your time Joshua Poelke

  11. Pingback: UNCA Astronomers Present at the 2019 AAS Meeting in Seattle – Astronomy & Astrophysics

Leave a Reply

Your email address will not be published. Required fields are marked *